Basic Photography Course

9-31.

In hand processing, the term "pull"
refers to what action?

Pulling the print through the
entire process

Removing the print from the
developer prematurely

Pouring chemical solutions

Removing prints from the dryer

9-32.

A negative with normal contrast was
printed with a No. 4 printing
filter.

Which of the following

statements best describes the
appearance of the prints?

The number of tones, reproduced
matches the original scene

tones closely

The print shows an abundance

of middle tones with few shadow
areas

The print is very flat

The print has high contrast

9-33.

When developing prints in a tray,

you should ensure they are agitated

in what manner?

Frequently

Intermittently

Constantly

Infrequently

9-34.

Which of the following statements

is most accurate regarding print

quality?

Print quality depends upon
correct exposure only

Print quality depends upon
correct development only

Print quality depends upon
correct exposure and
development

Print quality is governed by
the working characteristics
of the paper and developer

9-35.

You are hand processing a single
black-and-white print.

The print

should be treated in the stop bath
for what number of seconds?

3. 10
4. 5

9-36.

What is the most probable result of

a fixing bath that is diluted less
than recommended?

The prints sink

The prints float

The prints blister

The prints separate

from the base

9-37 .

When hand processing photographic

film and paper, it is common

practice to work in what direction?

From right to left

From left to right

From top to bottom

From bottom to top

9-38.

You are hand processing 26 8x10-
inch prints at one time in a tray.
You should agitate the prints in

what manner?

Move the bottom print to the
top of the stack

Move the top print to the
bottom of the stack

Turn all the prints at one

time and fan them quickly

Remove each print in succession
from the developer, drain it
for 5 seconds, then place the

print at the bottom of the
stack

9-39.

You are processing several black-
and-white prints at one time.

You

should treat the prints in the stop
bath for what number of seconds?

1. 15
2.

3. 60
4. 90

contents

Basic Photography Course

<- previous page

next page ->


DOFMaster for Windows On-line Depth of Field Calculator DOFMaster for Mobile Devices On-line Depth of Field Table Hyperfocal Distance Chart Articles FAQ Recommended Books Support Contact Links Home As an Amazon Associate I earn from qualifying purchases.	contents <- previous page next page -> 9-31. In hand processing, the term "pull" refers to what action? 1. Pulling the print through the entire process 2. Removing the print from the developer prematurely 3. Pouring chemical solutions 4. Removing prints from the dryer 9-32. A negative with normal contrast was printed with a No. 4 printing filter. Which of the following statements best describes the appearance of the prints? 1. The number of tones, reproduced matches the original scene tones closely 2. The print shows an abundance of middle tones with few shadow areas 3. The print is very flat 4. The print has high contrast 9-33. When developing prints in a tray, you should ensure they are agitated in what manner? 1. Frequently 2. Intermittently 3. Constantly 4. Infrequently 9-34. Which of the following statements is most accurate regarding print quality? 1. Print quality depends upon correct exposure only 2. Print quality depends upon correct development only 3. Print quality depends upon correct exposure and development 4. Print quality is governed by the working characteristics of the paper and developer 9-35. You are hand processing a single black-and-white print. The print should be treated in the stop bath for what number of seconds? 1. 20 2. 15 3. 10 4. 5 9-36. What is the most probable result of a fixing bath that is diluted less than recommended? 1. The prints sink 2. The prints float 3. The prints blister 4. The prints separate from the base 9-37 . When hand processing photographic film and paper, it is common practice to work in what direction? 1. From right to left 2. From left to right 3. From top to bottom 4. From bottom to top 9-38. You are hand processing 26 8x10- inch prints at one time in a tray. You should agitate the prints in what manner? 1. Move the bottom print to the top of the stack 2. Move the top print to the bottom of the stack 3. Turn all the prints at one time and fan them quickly 4. Remove each print in succession from the developer, drain it for 5 seconds, then place the print at the bottom of the stack 9-39. You are processing several black- and-white prints at one time. You should treat the prints in the stop bath for what number of seconds? 1. 15 2. 30 3. 60 4. 90 68 contents Basic Photography Course <- previous page next page ->	As an Amazon Associate I earn from qualifying purchases.
	WWW.DOFMASTER.COM © 2006 Don Fleming. All rights reserved.