Advanced Photography Course

3-45.

On a color CRT screen, what three
colors compose a single pixel?

Yellow,

magenta,

and cyan

Black, yellow, and blue

Black, cyan, and yellow

Red, green, and blue

3-46.

What term is used for the dupli-

cation of information in a digital
file?

Redundancy

Compression

Reoccurrence

Repetition

3-47.

As the compression ratio increases,
what happens to the quality of the

image?

It increases

It decreases

It remains the same

3-48.

What maximum compression ratio
can be used to provide a lossless
compression?

1. 5:l
2. 2:l
3. 3:l
4. 4:l

3-49.

What configuration(s) is/are used
to pass information from the
computer to the printer to ensure
the image is placed properly on the

paper?

RIP

PDL

Either 1 or 2 above

JPEG

3-50.

On a thermal-dye transfer printer,
a continuous-tone image is created

in what way?

By blending gaseous color dyes
released by donor ribbons and
transferring them to the print
material

By spraying dyes on the print
material and then heating the
dyes to make them permanent

By a series of tiny dots that

are blended by heating the

print material

By dye pigments in the print
material that are released when
heated

3-51.

What type of printer provides the

highest quality continuous-tone
color image?

Inkjet

Color copier

Thermal-wax transfer

Thermal-dye transfer

3-52.

When you are using graphical user-

interface software, what element(s)

of hardware is/are essential?

A mouse

A bit-mapped display

Both 1 and 2 above

A film scanner

3-53.

When images are manipulated in
the editing stage, changes to the
original image can be detected
readily on hardcopy?

True

False

Learning Objective:

Identify

the types of aerial photography.

(This objective is continued in

assignment 4.)

3-54.

What does the acronym TARPS

represent?

Total Air Reconnaissance

Procurement System

Territorial Air Reproduction

Photographic System

Tactical Air Reconnaissance

Pod System

Target Arrangement and
Reproduction Photo System

3-55.

An aerial photograph taken from

1,300 feet is considered to be

taken from what altitude?

Low

Medium

High

3-56.

What are the three basic categories
of aerial photography?

Reconnaissance, intelligence,
and survey

Gunnery exercises, refueling
at sea,

and publicity

Construction progress, accident

investigation, and ship
identification

Vertical, oblique,

and air-to-air

contents

Advanced Photography Course

<- previous page

next page ->


DOFMaster for Windows On-line Depth of Field Calculator DOFMaster for Mobile Devices On-line Depth of Field Table Hyperfocal Distance Chart Articles FAQ Recommended Books Support Contact Links Home As an Amazon Associate I earn from qualifying purchases.	contents <- previous page next page -> 3-45. On a color CRT screen, what three colors compose a single pixel? 1. Yellow, magenta, and cyan 2. Black, yellow, and blue 3. Black, cyan, and yellow 4. Red, green, and blue 3-46. What term is used for the dupli- cation of information in a digital file? 1. Redundancy 2. Compression 3. Reoccurrence 4. Repetition 3-47. As the compression ratio increases, what happens to the quality of the image? 1. It increases 2. It decreases 3. It remains the same 3-48. What maximum compression ratio can be used to provide a lossless compression? 1. 5:l 2. 2:l 3. 3:l 4. 4:l 3-49. What configuration(s) is/are used to pass information from the computer to the printer to ensure the image is placed properly on the paper? 1. RIP 2. PDL 3. Either 1 or 2 above 4. JPEG 3-50. On a thermal-dye transfer printer, a continuous-tone image is created in what way? 1. By blending gaseous color dyes released by donor ribbons and transferring them to the print material 2. By spraying dyes on the print material and then heating the dyes to make them permanent 3. By a series of tiny dots that are blended by heating the print material 4. By dye pigments in the print material that are released when heated 3-51. What type of printer provides the highest quality continuous-tone color image? 1. Inkjet 2. Color copier 3. Thermal-wax transfer 4. Thermal-dye transfer 3-52. When you are using graphical user- interface software, what element(s) of hardware is/are essential? 1. A mouse 2. A bit-mapped display 3. Both 1 and 2 above 4. A film scanner 3-53. When images are manipulated in the editing stage, changes to the original image can be detected readily on hardcopy? 1. True 2. False Learning Objective: Identify the types of aerial photography. (This objective is continued in assignment 4.) 3-54. What does the acronym TARPS represent? 1. Total Air Reconnaissance Procurement System 2. Territorial Air Reproduction Photographic System 3. Tactical Air Reconnaissance Pod System 4. Target Arrangement and Reproduction Photo System 3-55. An aerial photograph taken from 1,300 feet is considered to be taken from what altitude? 1. Low 2. Medium 3. High 3-56. What are the three basic categories of aerial photography? 1. Reconnaissance, intelligence, and survey 2. Gunnery exercises, refueling at sea, and publicity 3. Construction progress, accident investigation, and ship identification 4. Vertical, oblique, and air-to-air 20 contents Advanced Photography Course <- previous page next page ->	As an Amazon Associate I earn from qualifying purchases.
	WWW.DOFMASTER.COM © 2006 Don Fleming. All rights reserved.